Remote Control for Signal T2 Receivers Product

Programmable Remote Control for Signal DVB-T2 Receivers

Remote control for DVB-T2 receivers: Signal T2-MINI and Signal T2-BOX. It allows simultaneous control of a receiver and TV set (after a simple procedure of programming the remote control). The TV is provided with the ability to turn it on and off, adjust the volume, and change the video input. This avoids the need to use two remote controls.

The receiver remote control has 5 programmable buttons: on/off, change signal source, volume. After programming remote control there is no need to use original TV remote control. This is possible on condition that the TV is controlled via infrared and not via Bluetooth.

Programming the remote control:

Place the set-top remote control and the TV remote control in front of each other at a distance of 3-5cm.

• Hold down the SET button on the decoder remote control for about 3 seconds. The TV Power LED on the remote control will glow red more intensively.
• Press and release the teach button of the remote you want to program.
• Press the button of the original remote control.
• The SIGNAL receiver remote control will confirm the save signal by blinking the TV LED: one long blink followed by two quick blinks. Then the TV LED will light up steady.
• Repeat for the other buttons you want to program.
• When finished, press the SET button.